 |
 |
 |
 |
| The 2611 CB3 PLUS Module Wireless Multi-Client Bridge/Access Point operates in the 2.4 GHz frequency 802.11b (2.4GHz, 11Mbps) wireless standard. It's the best way to add wireless capability to your existing wired network, or to add bandwidth to your wireless installation.
To protect your wireless connectivity, it can encrypt all wireless transmissions through 64/128-bit WEP data encryption. The MAC address filter lets you select exactly which stations should have access to your network. With the Wireless Multi-Client Bridge/Access Point, you'll experience the best wireless connectivity available today |
|
 |
 |
|
 |
 |
 |
 |
 |
Features
|
* Product Features :
|
Firmware |
Data Sheets |
User Guides |
|
|
|
| |
| Features |
Benefits |
| Up to 23dBm(200mW) RF Output Power |
Up to 9 times coverage of Regular Multi-Client Bridge |
| 11Mbps IEEE 802.11b Compliant |
Fully Interoperable with IEEE 802.11b Compliant |
| Point-to-point, Point-to-multipoint Wireless Connectivity |
Let users transfer data between two buildings or multiple buildings |
| Plug and Play |
No driver needed, easy and quick to connect your Ethernet device to Wireless |
| Power-over-Ethernet |
Flexible Access Point locations and cost savings |
| 64 /128-bit WEP data encryption |
Powerful data security |
| Hide SSID (AP Mode) |
Avoids unallowable users sharing bandwidth, increases efficiency of the network |
| DHCP Client |
Simplifies network administration |
| Web-based configuration |
Helps administrators to remotely configure or manage the Multi-Client Bridge with web browser |
| MAC address filtering (AP Mode) |
Ensures secure network connection |
| Seamless Roaming |
Allows users to travel between APs without losing their network connection |
|
* Spec. : |
| General |
|
| Data Transfer Rate |
11, 5.5, 2 and 1 Mbps, Auto Fall-Back |
| Frequency Band |
2.400~2.484 GHz |
| Range (open environment) |
11 Mbps -300m/450m (23 dBm output power) 5.5 Mbps -400m/600m (23 dBm output power) 2 Mbps -500m/750m ( 23 dBm output power) 1 Mbps -800m/1200m (23 dBm output power) |
| Radio type |
Direct Sequence Spread Spectrum (DSSS) |
| Operation Channels |
11 for North America, 14 for Japan,13 for Europe, 2 for Spain, 4 for France |
| Modulation |
11 Mbps / 5.5 Mbps CCK 2 Mbps: DQPSK 1 Mbps: DBPSK |
| RF Connector |
mmcx |
| RF Output Power |
23dBm(200mW)-FCC 20dBm(100mW)-CE |
| WEP data encryption |
64/128-bit |
| Compatibility |
IEEE 802.11b compliant |
| Regulation Certifications |
FCC Part 15/UL, ETSI 300/328/CE |
| Power Supply |
12V DC/ 1A |
|
Network |
|
| Topology |
Point-to-Point/ Point-to-Multipoint/ Infrastructure |
| Interface |
One 10Base-T RJ-45 LAN Port |
| Firmware Upgrade |
Upgrade firmware via TFTP |
| Security |
MAC address filtering (AP Mode) WEP encryption (64/128 bit) Hide SSID in beacons, stations can not use "any" SSID (AP Mode) |
| IP Auto-configuration |
DHCP client |
| Management |
Web-based configuration |
|
Environment |
|
| Temperature Range |
0 to 55C (32F to 131F)- Operating -20C to 80C(-4F to 176F)- Storage |
| Humidity (non-condensing) |
5%~95% typical |
|
Physical Specifications |
|
| Dimensions |
125(L)mm * 108(W)mm * 31(H)mm 4.9 (L)in* 4.3(W)in * 1.2(H)in |
| Weight |
350 g (0.8 lb.) | | |
|
|
 |
 |
 |
 |
|
 |

|